Penetrated the firewall for the EMS and EFIS sensor cables. I wired the batter buss power lead and added heat shrink. Next I mounted the Lightspeed electronic ignition. I used nut plates on this which take longer to do but make service far easier. I spent the rest of the time sorting out harness wires and mounting and wiring a terminal strip for said wires.
Finished the oil cooler hose install, installed the fuel pressure hose, installed the oil and fuel sensors.
No Pics
5/23/2007
3
Fabricated firewall doubler for master and starter relay mount and riveted it on. Next I temporairly mounted the master relay and the starter relay to the firewall.